Vertical Balers
Designed for small volumes and limited budgets, vertical balers are manually fed and are a good solution for two bales per day or less. Common materials include corrugated, plastic wrap and textiles. Multiple options are available, depending on types of materials to be processed. 

Horizontal Balers
Horizontal balers are designed for continuous use. They can be set up for manual or automatic feeding. They offer significant labor savings over a vertical type baler. A wider range of materials can be processed, including large corrugated, plastic containers, cans and textiles.

Single Ram Closed Door Balers
Single ram closed door balers are designed to bale a wide variety of materials but are used most often to bale large corrugated boxes and paper trim. Ideal for distribution centers, document destruction facilities and printers/converters. You can optimize efficiency with an automated feeding by conveyor, cart dumper or trim system. Requires hand tying of bales.

Multi-Material Closed Door Balers
Process a wide variety of materials. Ideal for medium volume recycling centers. Full ram travel into the bale chamber enables baling of corrugated, plastics, paper, cans, textiles and non-ferrous scrap.

Single Ram Auto Tie Balers
Single ram auto tie balers are best suited for baling high volumes of corrugated and paper. A wide variety of models are available for recycling centers, printing plants, box manufacturing, document destruction and distribution centers.

Two Ram Auto Tie Balers
Automatic tie balers ideal for facilities that process a wide range of material. Two ram balers produce high-density bales of corrugated, paper, plastics, cans, non-ferrous scrap and solid waste. Ideal for material recovery facilities, recycling, scrapyards and landfills.


Stock is constantly being refreshed

Sign-up for monthly notifications >>>

Key Buying Steps

ID Material and Volume
What are the types of material you plan to bale? What is the volume in terms of tonnage? Material and volume drive the size and type of equipment to consider.
What is the volume that you expect the baler to handle? Per year, per month, per day and per hour. Throughput is one of the most important factors in the decision process.
Determine Baler Specs
Consider labor costs, wire costs per bale, maintenance, spare parts availability, lease vs. buy and budget.
Compare Options
After completing your homework, determining your needs, amounts to be baled, bale density desired, future volume predictions and budget, you should be ready to compare and decide.
Contact Apex Equipment
We prefer to work with you from the start. That said, we'll plug into your buying process where it makes the most sense. We want you what is best for you. Just give a call and get started today.

Excel Manufacturing EX62 EX63

The EXCEL® EX62 & EX63 are designed to bale cardboard, paper, aluminum cans, tin cans, newspaper, PET, HDPE, and other recyclables. These machines produce the best mill-sized bales in the industry without preconditioning. EXCEL® Manufacturing uses only the highest quality components available for ultimate performance and reliability.

Full penetration design enables baling of a wide range of materials.  These include corrugated, plastics, cans, various paper grades, and textiles.

  • Recycling Centers
  • Manufacturing and Industrial
  • Distribution Centers

IBC Titan-60-XHD-10

Extra heavy duty multi-material model capable of baling all recyclables plus non-ferrous scrap.  Processes siding, extrusions, insulated wire, radiators and more.
  • Bale Size 30 x 45 x 60
  • Bale Volume 47 Cubic Feet Expanded (Approximate)
  • Cycle Time 20 Seconds
  • Short Stroke 14 Seconds
  • Production Capacity 4,770/14,991 Cubic Feet
  • Aluminum siding
  • Radiators
  • Extrustion
  • Aluminum cans
  • Insulated copper wire
  • Corrugated
  • Plastics 
  • Paper
  • Scrap Yards
  • Recycling Centers

Excel EX63 Multi-Material Closed Door/Manual Tie with Conveyor --USED

Bales corrugated, plastics, paper, cans, and textiles – 20 HP motor, 54” x 35” feed opening.  Excellent condition!  


The EXCEL® Model EX62/63 bales the following materials:
Office Paper, Newspaper, OCC, Magazines, PET, HDPE, Aluminum Cans, Tin Cans, Plastic Film,
Carpet Padding, Textiles, and Other Materials.
Standard Features Include
• Hydraulic Door Latch (EX63 only)
• Regenerative Circuit (EX63 only) Reduces cycle time by 17 seconds
• The EX62 is manufactured standard with either left-hand or right-hand door swing.
• 20HP TEFC Motor, Standard Voltage - 208, 230, 460 Volt, 60 Hertz, 3 Phase
• Horsepower Limited Pressure Compensated Piston Pump
• Removable Shear Blade with Four Cutting Edges
• Six Fully Guided Wire Tie Slots
• Automatic Bale Sizing System
• Automatic Shear Jam Correction
• Short Stroke Feature to Reduce Cycle Time
• EXCEL’s® 1-2-3 Warranty
(1 Year Labor, 2 Year Parts, and 3 Years Structural and Cylinder) (U.S.A Only)
• Complete with MV32 Hydraulic Oil
• NEMA 12 rated Enclosures and Controls
• Remote Controls - According to Door Swing
• Safety Interlock Door with Decompression
• Clean Out Tool, Grease Gun, and Extra Touch Up Paint
• One Bundle of 12 x 13 Single Loop Wire Ties
• Sandblasted, Primed, and Painted Excel Blue for Long Lasting Durability
• Standard Hopper
• Lower Photo Eye
• UL, CUL Approved (CE Available)
• PLC Controlled Operation
• Available with an EXCEL® above ground or in-ground conveyor for a turn-key system

  • Recycling Centers
  • Manufacturing and Industrial
  • Distribution Centers

Excel Model EX62 Horizontal Baler

Excel Model EX62 - Completely reconditioned, including all new wire guides.  Bales corrugated, paper, plastics, cans, clothing, and more.

  • Manufacturing and Industrial
  • Scrap Yards
  • Recycling Centers
  • Distribution Centers
  • Document Destruction

Max Pak HCE-60-FE-9 Scrap Metal Baler - Used

This extra heavy duty closed door baler (30,000# frame) is designed to bale a wide range of scrap metal and other recyclables.  50 HP, 9" main cylinder - Processes aluminum siding, extrusions, radiators, cans, and more!

  • Scrap Yards
  • Recycling Centers

Excel EX60 Horizontal Baler

Excel Model EX60 Horizontal Baler - Serviced and in very good condition.  Bales corrugated, plastics, paper, cans, and more.

  • Manufacturing and Industrial
  • Recycling Centers
  • Document Destruction
  • Distribution Centers

Excel EX66

Excel Model EX66 Horizontal Baler - Extra heavy duty model.  Can be used for light non-ferrous, post industrial plastics, heavy slab paper, and other heavy duty applications.  Also great for corrugated, plastics, cans, and paper.


(2) 6” (15cm) Bore x 74” (188cm) Stroke x 4” (10cm) Hard Chrome Rod

105 Gal. (399 liters)

34 gal. (130 liters) Pressure Compensated Horse  

Power Limited Piston Pump, 4,000 PSI Rated

20 HP TEFC 230-460 Volt, 3 Phase

3,000 PSI Automatic Mode (3,250 Maximum) 159,467 lbs.

94 PSI

29 Sec. - 21 Sec. Short Stroke

60”L (152cm) x 45”W (122cm) x 30”H (76cm)

D08 Pattern, Hi-Flow Cushion Shift Design

(2) 3” (7.5cm) Bore x 42” (105cm) Stroke x 2” (5.1cm) Rod

NEMA 12 Rated, UL Approved

UL/CUL/CE Approved, NEMA 12 Rated

  • Recycling Centers
  • Scrap Yards

Request a Quote Today!

* indicates required